Category Archives: Bed Bug Cream

Bed bug images: photos of bed bugs and evidence of their presence: eggs, fecal stains, and cast skins

You can click many of the bed bug photos below and you will be taken to the flickr page. Click all sizes and then large to get the best view.

If you think you are suffering from bed bug bites, or if you have seen a strange bug or other signs, the photos below will help you determine if you have them. (Remember also that other problems can look like bed bug bites, so be sure and rule those out. See this FAQ if you need help detecting bed bugs.)

Obviously, you might find the bugs themselves! They can look vastly different based on life stage (there are 5 nymph stages and one adult stage) and whether theyve fed recently or not. For reference, see the following bed bug life cycle image:

This bed bug life cycle photo from Stephen L. Doggett, posted with his permission, also shows the difference between the just-fed adult (top, elongated), and the not-just-fed adult next to it on the right:

Here are some amazing photos of bedbugs feeding, including adults and nymphs (from L. Sorkin and R. Mercurio.)

Unfed first instar nymph (approx. 1 mm or 1/32 long; taken by Sorkin and Mercurio, American Museum of Natural History):

After the bed bug bites someone and feeds for the first time, it turns red. This is the same first instar once it has fully fed (it will be larger now; taken by Sorkin and Mercurio, American Museum of Natural History):

Read more:
Bed bug images Bedbugger.com

Below youll find comments from visitors around the world that show themselves covered with bed bug bites; many share their experiences in hopes that youll be able to avoid the pain they suffered along with tips on treating the bites and more. Great information here!

It only takes about 5 minutes for a bedbug to feed and in as little as a month, that bug could multiply into thousands. If only a portion of that colony were to feed on you while youre sleeping, you could wake up to a body covered in bites!

These blood suckers lock on to carbon dioxide (CO2), what you breathe out, especially when sleeping. Once they have you, they head toward a warm part of your body and begin to operate. First, two tubes are inserted into your body, one is used to fill the area of the bite with a mixture of anti-coagulant and anesthetic while the other is used to suck up your blood.

Heres the tricky part it can take up to two weeks before youll notice the bite! Some notice bites from bed bugs right away while other take much longer. For travelers, its very possible they may not appear until you are checked out of the hotel and back home.

This is exactly what an infested mattress looks like, including the bug, its shells, bed bug poop, eggs and more.

Vanessa, a visitor who shared her story, shows her young son after going to the doctor they were told the bites were from bed bugs and as you can see, bites like this can be very damaging! Its important not to scratch the area as doing so will cause scabbing and could leave a scar. The full story about their family vacation gone wrong is found below.

To your left is another visitor, Ava, and her neck after being bitten up by bed bugs. For many months, her son had been bitten and unfortunately, the doctors suggested scabies or fleas but couldnt tell for sure; a search of the house didnt turn up anything.

A few months later when her older son complained of his skin crawling in the middle of the night, Ava checked on the baby and found his bedframe and mattress were completely covered with bugs with many in the process of feeding!

Bedbug bites on baby from infested crib.

As you can see in the picture, this poor baby was helpless to do anything while the being attacked and bitten by bed bugs. If you ever see something like this, its an indication of an infestation close by and if you know what youre looking for, it will be easy to locate the nest.

See more here:
Bed Bug Bites and Quick Help including these Infestations ...

Q. I have a blanket and a through and a sheet on my bed, do I have to dispose of them or could I clean them with something and save them?

A. You can wash the items in hot water in order to kill any bed bugs. The ideal temperature for treatment is about 113-115 degrees Fahrenheit.

Q. Resistance Unraveled

I read recently in a trade magazine that bed bugs are building up a tolerance to pyrethrins. How does this happen? If a bed bug is killed by a pyrethrin it's dead. How do the other bed bugs begin to build up a tolerance? How do bed bugs in another location build up a tolerance?

We can blame Natural Selection at the increasing resistance of a number of insects to pesticides. Biological traits and natural adaptation are the reasons why a number of weeds are resistant to some herbicides and some rodents still survive after digesting rodenticide-laden food or traps. The same can be said of people who seem to have better immune systems.

In the case of common, there are studies and proof that they have become resistant to synthetic pyrethroids. Synthetic pyrethroids are man-made version of pyrethrin and are made from petroleum derivatives. Pyrethrin, on the other hand, is an organic compound that attacks and paralyzes insects' nervous systems. Over the years, the insecticide industry has been dependent of synthetic products and in effect helping produce the next generation of bugs which are immune to its effects.

While pyrethrin is a better choice, there have been studies that showed cockroaches recovering from pyrethrin treatments. Recent insecticides that contain pyrethrin are now manufactured with one or two synergists for added efficacy. Other studies have shown that bed bugs have become immune to the deadly effects of dichlorodiphenyltrichloroethane (DDT), a water soluble insecticide. And since pyrethroids and DDT share some similar modes of action in attacking nervous systems of insects, a number of bugs are also considered immune to pyrethroids.

However, the concern of most people is the effect of synthetic pyrethroids, Are they still effective against insect infestation? Can synthetic pyrethroids create "super bugs"? The answer is yes and no. The bugs may look like they are adapting to the affects - some species are hardly taken down by the treatments, while others take longer or stronger doses to die. What we are seeing is the survival of the fittest, their genetic composition may have the capability to block certain effects of the insecticide. When these surviving bugs reproduce, their offspring are likewise resistant to the insecticide.

It travel by breeding and finding temporary shelter in clothing. From there they could set up shop in almost anywhere in the country. Their survival has always depended on moving and breeding in places that could give them the most ideal living conditions and food sources. Their ancestors have survived through this strategy and must have passed on genes that have better resistance on the effects of pyrethroids.

Dr. Mike Potter of the University of Kentucky said that some populations of the common bed bug have shown 1000x factor of resistance to synthetic pyrethroids. This means that the effect of the said compound is likely to have no effect of the target insects.

Read more from the original source:
Buy Bed Bugs Control Product at Economic Price - Pestmall

Prepare the area : Pretreatment Procedures Reduce clutter to make bed bug inspection easier. Be careful when removing items from the infested area to other areas because you may transfer the bed bugs. Personal items (stuffed animals, soft toys, blankets) should be removed, cleaned with a vacuum cleaner, and bagged in plastic for a couple of days with Nuvan Strips. You can also bag laptops, phones and radios as well. The insecticide in Nuvan strips will not harm these items, and is non-residual, so you don't have to launder them after using the Nuvan strips Dismantling bed frames in infested areas may expose additional bedbug hiding sites. Remove drawers from desks and dressers, and turn furniture over to inspect and clean all hiding spots. All furniture should be pulled away from the walls. Stand up the box spring and shine a flashlight through the gauze fabric to expose bed bugs. If the fabric is torn (possible hiding place), remove fabric to prepare for spraying. If the mattress and or box springs are infested, you may want to consider Bed Bug Certified Encasements by Mattress Safe. Once covered with these encasements, bed bugs can not enter or exit. There is no need to treat the mattress or box spring when using these encasements. Keep them on for a year. Caulk and seal all holes where pipes and wires penetrate walls and floor, and fill cracks around baseboards and molding to further reduce harboring areas. Since infested garments and bed linen can't be treated with insecticide they will need to be laundered in hot water (120 degrees fahrenheit minimum). If washing is not available, sometimes heating the garments or bed linens for several minutes in a clothes dryer may work. Thoroughly clean the infested rooms. Scrub infested surfaces with a stiff brush to dislodge eggs. Vacuum areas of bed bug infestation with a vacuum attachment. Vacuum along baseboards, furniture, bed stands, rails, headboards, foot boards, bed seams, tufts, buttons, edges of the bedding, as well as the edges of the carpets (particularly along the tack strips). A good vacuum cleaning job may remove particles from cracks and crevices to encourage greater insecticide penetration. Bed bugs cling tightly to surfaces, so it is best to repeat vacuuming by scraping the end of the vacuum attachment over the infested areas to pull out the bed bugs. It is not good to use a bristle attachment, because you may transfer bed bugs to other areas since they cling to the brush. Dispose of vacuum cleaner bags after you are finished. Caulk cracks and crevices in the infested building exterior, and also repair openings to exclude birds, bats, and rodents that can serve as alternate hosts for bed bugs. Monitoring devices such as the BDS bed bug detection system should be placed around the infested area to help determine where the bed buge population resides. It is important to know that these devices are for monitoring only. Lack of trapped bed bugs does not necessarily mean that you are bed bug free.

Click Here: Bed Bug Control Video in Spanish/Espaol

To inspect properly, it may be helpful to understand Bed Bug Diet and Bedbug Habits Since bed bugs are difficult to see, we recommend using an industrial powered magnifier such as Carson's Dual View Magnifier. and a flashlight.

Dual View Industrial Magnifier

Bedbug Pictures: What does a bed bug look like?

The common bed bug is visible to the naked eye. Adult bed bugs are brown to reddish-brown, oval-shaped, flattened, and about 1/4 to 5/8 inch long. Their flat shape enables them to readily hide in cracks and crevices. After a blood meal, the body elongates and becomes swollen. Eggs are not placed on the host's body, but are found on surfaces near where the host sleeps.

Look in any place that offers darkness, isolation and protection. These bugs will often wander. Inspect adjoining rooms where an infestation is found. Even when the bed bugs themselves cannot be found, their hiding places can be located by looking for the spots of fecal material they often leave. Aerosols like CB-80, PT 565 and V-One have pyrethrins as an active ingredient. Pyrethrins help flush out the bed bugs for easier inspection. These aerosols kill on contact, but the idea is to flush them out for inspection. Simply insert the crack and crevice tip of the aerosol in the hiding place to see if any bed bugs are flushed out.

Fecal and bloody spots (look like rust) are left on sheets and pillowcases when the engorged bed bugs are crushed. These indicators serve as sure signs of infestation. Adult bed bugs are about 1/4-inch long and reddish-brown, with oval, flattened bodies. Bed bugs prefer to hide in cracks and crevices during the daytime and come out to feed on the host's blood at night, usually while the host is sleeping. Since bed bugs can flatten their bodies, they fit in very small crevices, specially around the bed area. They are found in habitual hiding places, preferably close to a blood meal. Even though the their preference is to be close they can travel several feet for a blood meal. Initial infestations tend to be around beds, but the bugs eventually become scattered throughout a room, occupying any crevice or protected location. They can also spread to adjacent rooms or apartments.

Look for areas near where the bed bugs are biting. Main areas of inspection are cracks and crevices in head and foot boards and attached side railings and supports. Look for any cracks or crevices where bed bugs may crawl into to hide. If the top of the mattress has any rips, the bed bugs may hide there as well. Look in your boxsprings also, both top and bottom for any rips that might shelter these bugs.

Inspection Check List:

Continue reading here:
How To Get Rid Of Bed Bugs | How To Kill Bed Bugs

Bed Bug Kits | How to Get Rid of Bed Bugs | Bed Bug Guide (pdf) | Bed Bug Guide - Espanol (pdf) | Bed Bug InspectionGuide

Hiring a bed bug exterminator can be very expensive, but we sell the exact same professional bed bug killer and control products that pest professionals use. Continue reading below the products on this page to learn how to kill and control bed bugs on your own.

Doing your own bed bug control is a decision you have likely made after experiencing the frustration that comes from living with a bed bug problem and learning of the immense cost involved with hiring an exterminator. This guide will help you get rid of bed bugs on your own, step-by-step.

*When it comes to Bed Bugs, there is no fix-all, easy solution. Complete control requires a carefully planned and designed integrated approach.

Bed bugs can be harder to treat than other household pest insects for a few reasons. The #1 thing that sets Bed bug control apart from other pest insect management programs is that you have to treat personal items such as clothing, shoes, picture frames, beds and furniture in some way but most other pests allow you to spot spray or apply a perimeter spray around the room. Bed bugs are not attracted to baits like roaches or ants so you must take the treatments directly to them. Another challenge bedbugs present is their ability to quickly become resistant to synthetic pyrethroids. While other insects may build up resistance to this chemical group, bedbugs seem to be able to do so exceptionally fast. These means you must use a variety of products and techniques to control bedbugs.

In most cases you can do your own bedbug elimination treatments. It really takes three components to be successful:

First and foremost, you must be willing to commit to the labor that is involved which include preparations prior to the treatment, the initial application and the needed repeat applications. Next, it is very important to choose products that are specifically labeled for bedbugs and labeled for use in the areas you intend to use them. Last, you must be thorough. There are no shortcuts when you are dealing with bedbugs. Every item, every crack and crevice and every void in the infested room must be treated in some way. Failure to be thorough will almost always lead to treatment failure.

There are several benefits to doing your own bedbug treatment.

1.You can do the treatment at your own pace and when you have time vs a company that will set a specific time frame for you to be home which could mean you will miss work.

Read more here:
Bed Bug Control Guide - Bed Bug Extermination & Killer ...